Bowers & Wilkins CT800 Bedienungsanleitung

CT800 SeriesInstallation Manual

Surround speaker dispersion modeSurround speakers generally fall into two main types – those that one might describe as ‘normal’ speakers - so-called

Mounting the speakersFor optimum performance, it is important that the speakers are firmly and securely mounted. All the speakers may be mounted direct

If it is desired to remove the roller glides, use the Torx® key supplied with the speaker to remove the retaining screws.An optional,

CT8 DS OnlyInstallation into drywall (figure 12)So that it can be sunk into a standard drywall up to the level of the side-firing drivers, the CT8 DS ha

CT8 DS only (cont’d) Installation to wall surface (figure 13)Using the front aspect template provided, mark the centre line of the retaining bracket on

CT8 DS only (cont’d)Continue for all casesConnect the signal and trigger cables to the speaker.Using the Allen key provided, remove the aluminium faci

Connecting the SystemThe speakersAll the speakers are provided with a comprehensive choice of connection methods. Binding posts accommodate 6mm (1/4 i

CT8 XO rear panelONFront left/right channelsONLeft surround channelONRight surround channelONCentre channelFigure 18CT8 XO rear panelONFront left/righ

Description of controlsThe unit features a comprehensive set of controls to tune the performance of each speaker according to the conditions of use. T

18The DIP switches should be set as follows, where ON is down: 

1Table of ContentsWarrantyOwner’s ManualImportant Safety InstructionsIntroductionEnvironmental InformationThe ConceptPlanning the InstallationChecking

Configure the CT800 XO to the speakerSet Bank 1 Switches 2 & 3 to the type of speaker.Set Bank 4 Switches 1, 3 & 4 according to the number of s

Setting the Subwoofer gainDisconnect the speakers from the power amplifiers.Connect the MF/HF power amplifier to the Subwoofer output of the unit.Set th

Configure the equalisersSensible correction of the in-room response requires the ability to measure the acoustic frequency response of each s

ProcedureTo avoid errors from airbourne background noise and electrical interference, switch off all sources in the room such as air conditioning, ref

Place the microphone at the chosen measurement position that is closest to the speaker under test (where it will measure the highest sou

To set this curve as a multiplier, press the F5 key. In this dialog box, select the file you just saved (Average_resp) and, under ‘Compensation of Leve

Set Bank 2 Switches 2 & 3 according to the number of filters required.Set the P (all) gain control (C3) to zero.The markings on the filter control d

Running InThe performance of the speakers will change subtly during the initial listening period. If they have been stored in a cold environment, the

The speaker cabinet surfaces and the casing of the CT8 XO usually only require dusting. If you wish to use an aerosol cleaner, remove any s

SpecificationsCT8 CC3-way closed-box system1x ø32mm (11⁄4 in) metal dome high-frequency1x ø150mm (6 in) woven Kevlar® cone FSTTM midrange2x ø250mm (10

Dear customer,Welcome to B&W.This product has been designed and manufactured to the highest quality standards. However, if something does go wrong

SpecificationsModelDescriptionDrive UnitsFrequency RangeFrequency ResponseDispersionSensitivityHarmonic DistortionNominal ImpedanceCrossover FrequencyR

Copyright © B&W Group Ltd. E & OEKevlar is a registered trademark of DuPontRohacell is a registered trademark of Röhm GmbHPrinted in Canada.UK

IMPORTANT SAFETY INSTRUCTIONSThe CT8 XO active crossover is a powered device. Before use, please read and heed the following instructions:Caution:To r

19 Do not overload wall outlets, extension cords or integral convenience receptacles, as this can result in a risk of fire or electric shock.20 N

5Thank you for purchasing a Bowers and Wilkins Custom Theatre system.Since its foundation in 1966, the continuing philosophy of B&W has been the q

The CT 800 range comprises five products:CT8 LR A 3-way speaker intended for front left and right channels, one placed in vertical orientation at each

Although the speakers are semi-active and require an active crossover, all power amplification must be separately sourced. Each CT8 LR, CT8 CC and CT8

Safety Warning!A CT800 system is capable of producing very high sound pressure levels. Prolonged exposure to high sound levels can lead first to tempor